Do you remember the dining room in my previous house?
It is one room our lake house does not have. Since we only used the room a few times a year, I was OK with not having a special room to dine for entertaining purposes. When we were packing up the house, I edited and purged the items in the room I knew I no longer wanted or needed, but still kept the items I knew I would use again and again when entertaining at our new house.
Without a dining room though, I needed to find a place to store these kept items.
I found ways to repurpose the furniture… the turquoise corner cabinet became a music cabinet in the rec room upstairs. We took apart the top of the hutch and I made a mantel for the living room using a piece of it. The bottom of the hutch is now used as a dresser in a guest room. The white mantel is in my bedroom. We removed the legs from the table and have it stored in the attic. I am using the chairs in the guest rooms and the rest are in attic storage.
Without any of these pieces of furniture in kitchen proximity, I had to find a place for the items that were stored in them.
Most of the white pitchers I have displayed in my kitchen. I removed the cabinet doors so I could enjoy seeing them on a daily basis. :-)
The rest I literally stuffed into this small closet in the hallway of darkness until I had time to deal with it.
The previous owner of the house left a Rubbermaid shelving unit in the closet. That alone with 2 shelves and a rod, it once must have been a coat closet. I knew the closet needed a makeover and finally got around to doing it so I could store and organize the dining room items I kept. I am now calling the small closet my “China Closet”.
Here is how I took a small unorganized closet and custom made it to fit my needs.
Small Closet Makeover
- Primed MDF 11-1/4″ wide boards cut to the length needed. Will need 2 cut for each shelf.
- Primed MDF 1″ x 2″ – cut a few inches shorter than the depth of the closet. Will need 2 for each shelf.
- Wood screws
- Bubble level
- Painter’s tape
- Paint, Paint Roller, brush, and tray
I removed the metal rod and 2 shelves and then cleaned and painted the walls. I don’t think they have been touched since the house was built in 1974. We added new flooring a few weeks ago. I showed you that when I posted about the powder room makeover.
I used Glidden Complete in the color White. It is their new stain blocking paint and primer in one. I love it and wrote about it here when I started to paint the brown stained woodwork in my kitchen.
The paint and new flooring alone made a huge difference to the space!
I then measured the height of the items I wanted to store in the closet and figured out how many shelves I would need. I used a bubble level, painter’s tape, and a pencil to mark the placement for each shelf.
I cut the MDF 1″ x 2″s to a few inches shorter than the depth of the closet. I attached them to the wall with wood screws. I had the 11- 1/4″ wide MDF boards cut to width of the closet and used two to create each shelf.
- Using two boards instead of one large board for each shelf makes placing them into the small space much easier.
Here is the AFTER
Everything I need can now be seen at a glance and is easy to get to. It is like a mini version of the pantry in my previous house.
- I like to use wicker baskets and labels to help me keep smaller items organized.
I find most of the small baskets at yard sales and thrift stores. I look for square and rectangular baskets with low sides. Many of the smaller ones I find have handles that I cut off once I get home. They are getting harder to find, but I still go in search for them. I have found a few resources for the smaller ones online. I have them listed at the end of the post.
IKEA, HomeGoods, TJMaxx and Marshalls are also good places to find affordable larger baskets to use on the floor of a closet. I make laminated labels for every basket. You can find all the labels I use here —> on my Free Printable label page.
How-to Attach the Labels:
To attach the label to the basket, make a hole in the label, place the tips of a brass fastener through the hole and into a space in the wicker. Once all the way through, spread out the fastener tips to secure.
I added enough shelves to hold everything from candles to infrequently used appliances.
I only added one board for the top shelf to make it easy to see and get the contents off when needed.
The distance between the lower shelves is 9 inches.
I left enough room between the floor and the first shelf to store larger items. The distance is 17″.
I can’t seem to pass by a pretty dish towel when out shopping. I do like to change them up in my kitchen seasonally. There are more behind these two piles. :-)
I also like placemats, paper doilies, and platters. Along with…
…tealights in two different sizes…
…and lots of holders for all of them. If you have been reading my blog for any length of time, I am sure you remember seeing these candle holders in many of my posts.
I can’t tell you how much having this closet finally in order makes me smile. It is so nice to open the door now and find exactly what I need in a minute.
There is another closet exactly like this right across from this one that I am going to call the “Party Closet”. It still needs to be painted. I will share that with you soon as well as a few other decorative things I plan to brighten the hallway of darkness.
- Find the style of free printable labels I used for the closet here: Decorative Free Printable Labels
- To see other ways I organize with baskets check out this post: Organizing Drawers and More with Baskets
- Link to the small baskets that I cut the handles off. I found them online: Affordable small baskets
See more baskets I found online below: