| | |

DIY: Basket Christmas Tree Collar

This Post May Contain Affiliate Links. Please Read my Disclosure Policy.

How to make a Christmas Tree Collar to hide the tree stand using a Dollar Store find.


Remember this huge basket I found at the thrift store a few months ago?

I had you try to guess what I was going to do with it.

Well…  it is finally time to show you.

How to turn a basket into a Christmas Tree skirt

I transformed it into a Christmas tree collar.

Christmas tree collar. Christmas-Tree-Skirt-made-using-a-basket

I have always wanted a basket collar, but they can be pricey and it was not a necessity to decorate for Christmas, so I did without.


Until I saw the big basket at the thrift store for a whopping $6.90, I was beyond excited.

I could not use it as is – it needed a few tweaks, but nothing a hack saw, wire cutters, and some stain couldn’t take care of.

How to Transform a Big Basket into a Christmas Tree Skirt

supplies needed:

  • large basket – with or without a handle. The measurements of mine: 12″ high. Diameter: 20″ wide at the top, 24″ at the bottom.
  • hack saw
  • wire cutters

Optional:  Rustoleum Weathered Grey stain and a paint brush


1. Use a hack saw to remove the handle.   After handle is removed, remove any small reeds that were used to hold the handle in.  They will slip right out.


2.  My tree stand is wide, so I needed to flip the basket upside down so the wider section of the basket was at the bottom.


3.  To remove the bottom of the basket, look for the area where the smaller weave ends. This is where you want to cut.  Use wire cutters to cut the reeds that connect to the basket’s side.  Make sure you are not cutting the side  horizontal reeds – you only want to cut the vertical reeds.


4.  Carefully remove the bottom.  It will look like this.

Christmas-Tree-Collar idea DIY

5. Use the wire cutters to trim any rough reeds that may be sticking out along the top edge.


6.  You could leave your basket the color it is, but I wanted my basket to look a bit weathered. I used Rustoleum Weathered Gray stain. I applied it with a brush and then quickly wiped it away to expose some of the original color.  Let dry. Here are some more tips for painting baskets.

Christmas-Tree-Stand-and cover Ideas

7.  Place on floor around tree stand, then place your tree in the stand. I always place plastic under my stand just to make sure no water gets on the floor.  I bring the ends of it up and around the stand.   You don’t see it when it is in the basket.

How to turn a basket into a Christmas Tree skirt or Christmas Tree collar
Wicker Christmas Tree collar getting a coat of glitter
Glitter added to the basket tree collar.

You May Also Like:

More ideas on Christmas tree collars, skirts and stand covers.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.


  1. What a great idea. I have never seen this before. That’s why I keep coming back to your blog. Thanks for sharing!