Before

Update the exterior of your home with a wood slat wall to create a point of interest where there is none.

Supplies Needed:

Sand Each Board

1 This will remove the factory milled finish so stain will penetrate better. Learn more

Stain Boards

Make a Jig

Drill two holes on each end of each board.

Begin by attaching 2 - 3 vertical boards to the wall. For a brick wall use masonary screws.

Use a 1" thick board as a spacer between horizontal boards as you add them so they are the same distance apart.

Address Plate

All Done

[{"selector":"#anim-f28f29c7-bc46-4226-850b-0e92a8a3a017","keyframes":[{"offset":0,"transform":"translate3d(0, -582.71632%, 0)","easing":"cubic-bezier(.5, 0, 1, 1)"},{"offset":0.29,"transform":"translate3d(0, 0%, 0)","easing":"cubic-bezier(0, 0, .5, 1)"},{"offset":0.45,"transform":"translate3d(0, -163.859829184%, 0)","easing":"cubic-bezier(.5, 0, 1, 1)"},{"offset":0.61,"transform":"translate3d(0, 0%, 0)","easing":"cubic-bezier(0, 0, .5, 1)"},{"offset":0.71,"transform":"translate3d(0, -55.707680192000005%, 0)","easing":"cubic-bezier(.5, 0, 1, 1)"},{"offset":0.8,"transform":"translate3d(0, 0%, 0)","easing":"cubic-bezier(0, 0, .5, 1)"},{"offset":0.85,"transform":"translate3d(0, -20.919515888%, 0)","easing":"cubic-bezier(.5, 0, 1, 1)"},{"offset":0.92,"transform":"translate3d(0, 0%, 0)","easing":"cubic-bezier(0, 0, .5, 1)"},{"offset":0.96,"transform":"translate3d(0, -9.090374592%, 0)","easing":"cubic-bezier(.5, 0, 1, 1)"},{"offset":1,"transform":"translate3d(0, 0%, 0)","easing":"cubic-bezier(0, 0, .5, 1)"}],"delay":0,"duration":1600,"fill":"both"}] See More...

[{"selector":"#anim-75b63a47-d836-4af4-bd44-f74cc0806029 [data-leaf-element=\"true\"]","keyframes":{"transform":["translate(-1.0658141036401503e-14%, 0%) scale(1.5)","translate(0%, 0%) scale(1)"]},"delay":0,"duration":2000,"easing":"cubic-bezier(.3,0,.55,1)","fill":"forwards"}] Learn More

Before

Plain House Exterior

Update the exterior of your home with a wood slat wall to create a point of interest where there is none.

Supplies Needed:

1″ x 3-1/2″ wide pine or cedar boards Wood Stain Screws Saw, sander, screwdriver

Sand Each Board

Stain Boards

Use a Stain & Poly In One Formula

Make a Jig

To create aligned screw holes

Drill two holes on each end of each board.

Drill Holes

Begin by attaching 2 - 3 vertical boards to the wall. For a brick wall use masonary screws.

Installation

Use a 1" thick board as a spacer between horizontal boards as you add them so they are the same distance apart.

Horizontal

Boards

Address Plate

Mount address plate on a separate piece of wood.

All Done