I hope you had a nice weekend. I spent it trying to get my computer fixed. I am happy to report it is now humming along again after many hours spent online and on the phone with the help desks at Adobe, Dell, and Carbonite. As promised, I have an easy-to-make no-sew window treatment to share with you today.
I received an email two weeks ago, asking me about the window treatment in my master bath that I included in my Parade of Homes House Tour post. I had to go to the post to see what window treatment was in question. When I went through the post, I realized that I hadn’t done a tutorial post on how to make the window treatment.
I wasn’t sure how I was going to explain the process. Itis one that I quickly fashioned without a pattern and using only what I had on hand. When I worked in retail display – this is how we made everything – we had to create using only with what we had in the prop room to make all sorts of decorative treatments in a short period of time. I used fabric glue for everything. I am going to try my best to explain how I made it. I made another one that is even simpler to hang, so that you can see there are options and no wrong or right way to make something for your home – only what your skills and style dictate is right for you.
I made these the no-sew way, but they could just as easily be made using a sewing machine.Fabric Fabric glue Curtain rod 1 yard of ribbon for each tie. I needed 4 ties for a 36” wide window. Iron-on fleece or felt – I used Pellon brand. Scissors Measuring tape Both versions of the valance are simply a long rectangle of fabric.
1st Version – Gathered Tie-On
The valance in my master bath is a white rectangle of fabric that is tied onto vintage swing rods with ribbon.
I bought the swing rods many years ago to use for a Decorator’s ShowHouse room I completed. You can find rods like these by doing a Google search for “Drapery Swing Rods” or “Vintage Swing Rods”. I found a bunch of swing rods listed for sale on ebay last night. The valance that hung from it in the Showhouse was more elaborate and a bit more complex to make. I kept it and used it in my bathroom for a short time. Since I liked the size and shape of it, I fashioned a simpler version of it with updated colors, when I redecorated the room a few years ago.
Swings rods are made to hang drapery panels. With traditional rods – drapery panels move side to side along a rod to cover the window. With swing rods – the rods themselves swing out of the way when you need to get to the window. I took a creative license to use the rods in my own style – as a decorative way to hang a simple valance. They are stationary. I like the contrast of the detail in the rod against the white valance.
Fabric needed: Double the width of the window for your width measurement. Mine was 36-inches. For the height – 15 inches is what I used. I doubled it so I could make a lining. Add 2-inches to each measurement to turn over to make finished edges/hems. For instance: If your window is the same dimension as mine – your cut fabric should measure 74” x 32”.
I made this version by folding all the raw edges of the cut fabric over 1-inch and then pressing them. I then folded the entire piece of fabric in half lengthwise. To seal the sides and top edges together, I ran a line of fabric glue all along the folded edges and pressed to create sealed seams.
To hang the gathered tie-on valance:
The extra length of the fabric allows for the gathers and dips in between the ties.
Starting on one top edge of the valance -gather about 5-6 inches of fabric in your hand. Wrap the ribbon around it and secure with a knot. Then bring the ends of the ribbon around the rod and back to the front of the gathered fabric. Tie the ribbon into a knot to secure the gathered fabric to the rod.
Repeat at the opposite end. Once the ends are tied on, figure out the spacing needed for the two center gathered ties and then tie each one in the same way as the first. Use your fingers to smooth the top of the dips and to spread out the fabric above each tie. The bottom will automatically lay into soft folds. You may have to coax them a bit. There is no wrong or right way when fashioning a window treatment like this. When I have taken it down to clean – it went back up slightly different. It does not have to be perfect to add decorative interest to your room.
2nd Version – Straight Tie-On Window Valance
To help demonstrate how simple a tie-on valance is to make – I made a second version without gathers. I found fun novelty fabric at JoAnn’s Fabrics called Multi Colored Elephants by AAK D# 70104. It took me about 30 minutes to make, start to finish.
The front is fabric I finished by folding over and pressing raw edges. For the lining, I used iron-on fleece/felt pressed onto the back.
Measure the width of your window. Add half of that measurement to get the width needed. For instance: Window is 36-inches wide. 36 + 18 (half of of 36) = 54 Your fabric should measure 54” x 15”. Add 1-inch to all sides for finished edges/seam allowance. Cut fabric 56” x 17”.
1. Fold over all raw edges 1-inch and press. Place a line of glue under fold and then press again to create a finished edge.
2. Cut the lining a bit smaller than the fabric.
3. Lay fabric right side down. Place cut lining on top.
4. Press to adhere.
It will look like this when you are done.
To attach the ribbon ties:
5. Fold ribbon in half. Add a dab of glue right in the fold.
6. Add a dab of glue to the bottom of one side of the ribbon.
7. Along the top edge of the fabric, place the glue side of the ribbon down on one end.
8. Press to adhere. Repeat with other ribbons evenly spaced along the back top edge.
To hang: Tie the ribbons onto the rod. Arrange the fabric so it bows out a bit in between each tie.